Description
Feature.1 Multi-cleaning for orthoprosthesis
Inhibiting factors such as saliva are removed by applying “Multi Etchant,” and then rinsing and drying, which brings out the true performance of the adhesive material.
The test specimens contaminated with saliva were cleaned in the relevant ways, and tensile adhesive strength was then checked under the same conditions while using self-adhesive type resin cement. (refer to ISO/TS 11405)
Feature.2 Simultaneous cleaning and priming effect on zirconia
This product exhibits both a priming effect as well as a cleaning effect for zirconia treatment.
Adhesive strength when using primer combination type resin cement on zirconia test specimens on which primer pretreatment is not done (refer to ISO/TS 11405)
M-TEG-P has the property of binding strongly to zirconia surfaces, which also generates priming effect.
Feature.3 Mild etching for both enamel and dentine
Etching can be done by applying Multi Etchant to tooth substance. It gives enamel surface roughness and removes cutting waste (smear layer and smear plug) from dentine, which assists the adhesion of bonding materials. The mildness of this product prevents dentine from over-decalcification.
Please read the instructions for use for this product and the related materials before use.
Cleaning of restoration*1 surface
-
1. Rinse the adherend surface thoroughly and dry.
-
2. Squeeze this product onto the adherend surface.
-
3. Rub lightly with a micro-brush for 20 sec. or more while applying.
-
4. Leave it for 10 sec. or more.
-
5. Rinse thoroughly with water until the color of this product has disappeared.
-
6. Dry with oil-free air.
-
7. Apply adhesive material*2. Then, adhere abutment tooth etc. in accordance with normal practice.
-
The same cleaning procedure can be applied for metal core, abutment tooth and repairing of falling crown.
*1Applicable for zirconia, glass-ceramics, resin which contains inorganic fillers (CAD/CAM crown, hybrid-resin, hard resin, composite resin etc.), and metal (precious metal, non-precious metal). The product exhibits priming effect on zirconia.
*2Please use appropriate adhesive material (primer, cement, bonding etc.) depending on the materials and the case being treated.
*3Applicable for both enamel and dentine.
Tooth substance*3 Etching
-
1. Rinse the adherend surface thoroughly and dry.
-
2. Squeeze this product onto the adherend surface.
-
3. Rub lightly with a micro-brush for 20 sec. or more while applying.
-
4. Leave it for 10 sec. or more.
-
5. Rinse thoroughly with water until the color of this product has disappeared.
-
6. Dry with oil-free air.
*3Applicable for both enamel and dentine.